Molybdenum Disulfide
-
Hot
Molybdenum Disulfide Powder
Molybdenum Disulfide Powder can be directly used as a solid lubricant. Molybdenum Disulfide Powder also mainly applies to produce solid lubricant grease, lubricant additives, friction improver and molybdenum metallic compounds.
Send Email Details
Molybdenum Disulfide Powder is a lubricant grade of molybdenum disulfide (MoS2) available in three grades-Technical, Technical Fechnical Fine,and Super Fine.Typical MoS2 content (calculated average) is 98.5%.
Molybdenum Disulfide Powder is a good solid lubricant that can be lubricated in a vacuum or air environment for a long time. The friction coefficient is relatively low, and Molybdenum Disulfide Powder can be lubricated for a long time in the air below 350 ℃.
With more than ten years of research and development experience, it can provide an annual output of 1,000 tons of Molybdenum Disulfide Powder as a patented technology product. -
Hot
Molybdenum Disulfide Technical Grade
The S in Molybdenum Disulfide Technical Grade has strong adhesion to the metal, so that Molybdenum Disulfide Technical Grade can well adhere to the metal surface and always play a lubricating function, especially Molybdenum Disulfide Technical Grade still has a low friction factor under high temperature and high vacuum conditions.
Send Email Details
Molybdenum Disulfide Technical Grade is a good solid lubricant that can be lubricated in a vacuum or air environment for a long time. The friction coefficient is relatively low, and Molybdenum Disulfide Technical Grade can be lubricated for a long time in the air below 350 ℃.
With more than ten years of research and development experience, it can provide an annual output of 550 tons ofMolybdenum Disulfide Technical Gradeas a patented technology product.
Molybdenum Disulfide Technical Grade is a lubricant grade of molybdenum disulfide (MoS2). Typical MoS2 content (calculated average) is 98.5%. -
Molybdenum Disulfide For Release Agent
Molybdenum Disulfide For Release Agent is used as a powder system as a mold release agent, which has the advantages of high temperature resistance, wear resistance and tensile strength. In Molybdenum Disulfide For Release Agent a layer of molybdenum atoms is sandwiched between two layers of sulfur atoms. When Molybdenum Disulfide For Release Agent is dispersed between two metal surfaces, molybdenum disulfide binds to each metal surface through sulfur atoms, which hinders the contact of asperities (irregular parts of the metal surface), and sliding contact is in the sulfur atoms between the outer layers, the interaction between them is very weak. Therefore, the surfaces that bind Molybdenum Disulfide For Release Agent can easily slide against each other.
Send Email Details
The friction coefficient is relatively low, and Molybdenum Disulfide For Release Agent can be lubricated for a long time in the air below 350 ℃. -
Molybdenum Disulfide For Brake Pad
Molybdenum Disulfide For Brake Pad is added to brake pads as a friction reducing material. As a friction reducing material, Molybdenum Disulfide For Brake Pad has very good dispersion, wear resistance and noise reduction effect. When the friction temperature increases sharply, molybdenum trioxide will appear during the oxidation of Molybdenum Disulfide For Brake Pad, and it will expand with the increase of temperature, thereby increasing the friction. The specific gravity of Molybdenum Disulfide For Brake Pad crystals is 4.5-5.2. As the fineness of Molybdenum Disulfide For Brake Pad increases, the specific surface area also increases, the specific gravity decreases, and the weight of the brake pads also decreases to a certain extent. The use of Molybdenum Disulfide For Brake Pad can effectively improve the wear resistance and stability of brake pad products.
Send Email Details -
Molybdenum Disulfide For Valve Guide
Molybdenum Disulfide For Valve Guide can be used as a dry lubricant in dispersions.Various metal materials and alloy materials added with Molybdenum Disulfide For Valve Guide after surface treatment have significantly prolonged service life, and also play a huge role in mechanical lubrication.
Send Email Details
Molybdenum Disulfide For Valve Guide is a good solid lubricant that can be lubricated in a vacuum or air environment for a long time. The friction coefficient is relatively low, and Molybdenum Disulfide For Valve Guide can be lubricated for a long time in the air below 350 ℃.
With more than ten years of research and development experience, it can provide an annual output of 1,000 tons of Molybdenum Disulfide For Valve Guide as a patented technology product.
Molybdenum Disulfide For Valve Guide is a lubricant grade of molybdenum disulfide (MoS2) available in three grades-Technical, Technical Fechnical Fine,and Super Fine.Typical MoS2 content (calculated average) is 98.5%. -
Molybdenum Disulfide For Powder Metallurgy
Molybdenum Disulfide For Powder Metallurgy can be used as a dry lubricant in dispersions.Various metal materials and alloy materials added with Molybdenum Disulfide For Powder Metallurgy after surface treatment have significantly prolonged service life, and also play a huge role in mechanical lubrication.Unlike graphite, Molybdenum Disulfide For Powder Metallurgy's low coefficient of friction (0.03-0.06) is inherent, not due to adsorption films or gases.
Send Email Details
Molybdenum Disulfide For Powder Metallurgy is a good solid lubricant that can be lubricated in a vacuum or air environment for a long time. The friction coefficient is relatively low, and Molybdenum Disulfide For Powder Metallurgy can be lubricated for a long time in the air below 350 ℃.
With more than ten years of research and development/ R&D experience, it can provide an annual output of 1,000 tons of Molybdenum Disulfide For Powder Metallurgy as a patented technology product.
Molybdenum Disulfide For Powder Metallurgy is a lubricant grade of molybdenum disulfide (MoS2) available in three grades-Technical, Technical Fechnical Fine,and Super Fine.Typical MoS2 content (calculated average) is 98.5%. -
Hot
MoS2 Powder
MoS2 Powder products have the advantages of good dispersibility and non-adhesion. MoS2 Powder can be added to various oils to form a colloidal state that never adheres. MoS2 Powder can increase the lubricity and extreme pressure of oils.
Send Email Details
MoS2 Powder is a good solid lubricant that can be lubricated in a vacuum or air environment for a long time. The friction coefficient is relatively low, and MoS2 Powder can be lubricated for a long time in the air below 350 ℃.
With more than ten years of R&D experience, it can provide an annual output of 1,000 tons of MoS2 Powder as a patented technology product.
MoS2 Powder is a lubricant grade of MoS2 available in three grades-Technical, Technical Fechnical Fine, and Super Fine.Typical MoS2 content (calculated average) is 98.5%. -
Hot
MoS2
MoS2 can be used at temperatures from -60°C to 400°C. MoS2 is known as "the king of advanced solid lubricants".
Send Email Details
MoS2 is a good solid lubricant that can be lubricated in a vacuum or air environment for a long time. The friction coefficient is relatively low, and MoS2 can be lubricated for a long time in the air below 350 ℃.
With more than ten years of R&D experience, it can provide an annual output of 1,000 tons of MoS2 as a patented technology product.
MoS2 is a lubricant grade of MoS2 available in three grades-Technical, Technical Fechnical Fine, and Super Fine.Typical MoS2 content (calculated average) is 98.5%. -
Molybdenum Disulphide
Molybdenum Disulphide is added to lubricating oil, grease, as well as polytetrafluoroethylene, nylon, paraffin and stearic acid. Molybdenum Disulphide can improve lubrication and reduce friction. Molybdenum Disulphide can prolong lubrication cycle, reduce costs and improve working conditions. Molybdenum Disulphide can also be used as a release agent and forging lubricant for non-ferrous metals.
Send Email Details
Molybdenum Disulphide is a good solid lubricant that can be lubricated in a vacuum or air environment for a long time. The friction coefficient is relatively low, and Molybdenum Disulphide can be lubricated for a long time in the air below 350 ℃.
With more than ten years of research and development experience, it can provide an annual output of 1,000 tons of Molybdenum Disulphide as a patented technology product.
Molybdenum Disulphide is a lubricant grade of molybdenum disulfide (MoS2) available in three grades-Technical, Technical Fechnical Fine,and Super Fine.Typical MoS2 content (calculated average) is 98.5%.