molybdenum disulfide powder

Molybdenum Disulfide Powder can be directly used as a solid lubricant. Molybdenum Disulfide Powder also mainly applies to produce solid lubricant grease, lubricant additives, friction improver and molybdenum metallic compounds. Molybdenum Disulfide Powder is a lubricant grade of molybdenum disulfide (MoS2) available in three grades-Technical, Technical Fechnical Fine,and Super Fine.Typical MoS2 content (calculated average) is 98.5%. Molybdenum Disulfide Powder is a good solid lubricant that can be lubricated in a vacuum or air environment for a long time. The friction coefficient is relatively low, and Molybdenum Disulfide Powder can be lubricated for a long time in the air below 350 ℃. With more than ten years of research and development experience, it can provide an annual output of 1,000 tons of Molybdenum Disulfide Powder as a patented technology product.

The S in Molybdenum Disulfide Technical Grade has strong adhesion to the metal, so that Molybdenum Disulfide Technical Grade can well adhere to the metal surface and always play a lubricating function, especially Molybdenum Disulfide Technical Grade still has a low friction factor under high temperature and high vacuum conditions. Molybdenum Disulfide Technical Grade is a good solid lubricant that can be lubricated in a vacuum or air environment for a long time. The friction coefficient is relatively low, and Molybdenum Disulfide Technical Grade can be lubricated for a long time in the air below 350 ℃. With more than ten years of research and development experience, it can provide an annual output of 550 tons ofMolybdenum Disulfide Technical Gradeas a patented technology product. Molybdenum Disulfide Technical Grade is a lubricant grade of molybdenum disulfide (MoS2). Typical MoS2 content (calculated average) is 98.5%.

Molysulfide is used in military fields, automobile industry, machining, aerospace, petrochemical, Lithium-ion batteries, composite materials, coatings, sealing materials, etc. Molysulfide has a wide range of applications. Molysulfide is a good solid lubricant that can be lubricated in a vacuum or air environment for a long time. The friction coefficient is relatively low, and Molysulfide can be lubricated for a long time in the air below 350 ℃. With more than ten years of R&D experience, it can provide an annual output of 1,000 tons of Molysulfide as a patented technology product.

Molybdenum Disulphide is added to lubricating oil, grease, as well as polytetrafluoroethylene, nylon, paraffin and stearic acid. Molybdenum Disulphide can improve lubrication and reduce friction. Molybdenum Disulphide can prolong lubrication cycle, reduce costs and improve working conditions. Molybdenum Disulphide can also be used as a release agent and forging lubricant for non-ferrous metals. Molybdenum Disulphide is a good solid lubricant that can be lubricated in a vacuum or air environment for a long time. The friction coefficient is relatively low, and Molybdenum Disulphide can be lubricated for a long time in the air below 350 ℃. With more than ten years of research and development experience, it can provide an annual output of 1,000 tons of Molybdenum Disulphide as a patented technology product. Molybdenum Disulphide is a lubricant grade of molybdenum disulfide (MoS2) available in three grades-Technical, Technical Fechnical Fine,and Super Fine.Typical MoS2 content (calculated average) is 98.5%.

MoS2 Technical Fine Grade has strong corrosion resistance, compression resistance, high vacuum resistance, radiation resistance and adhesion to metals. . MoS2 Technical Fine Grade is a good solid lubricant that can be lubricated in a vacuum or air environment for a long time. The friction coefficient is relatively low, and MoS2 Technical Fine Grade can be lubricated for a long time in the air below 350 ℃. With more than ten years of research and development experience, it can provide an annual output of 550 tons of MoS2 Technical Fine Grade as a patented technology product. MoS2 Technical Fine Grade is a lubricant grade of molybdenum disulfide (MoS2). Typical MoS2 content (calculated average) is 98.5%.

Compared with conventional molybdenum disulfide, the number of surface atoms in Nano molybdenum disulfide is significantly increased, and more sulfur vacancies are formed, which makes the catalytic activity and selectivity of Nano molybdenum disulfide higher. Nano molybdenum disulfide can be used as a highly active hydrogenation catalyst for heavy oil conversion and fuel oil refining. Nano molybdenum disulfide is used as a catalyst in the process of carbon monoxide methanation with high selectivity and reactivity. Nano molybdenum disulfide is also a catalyst for coal liquefaction. When used in the petrochemical industry, Nano molybdenum disulfide is a good catalytic hydrodesulfurization catalyst. Nano molybdenum disulfide that meets different functional requirements can be prepared by different methods, such as molybdenum disulfide self-lubricating thin layer, molybdenum disulfide intercalation battery, molybdenum disulfide high-efficiency hydrodesulfurization catalyst, etc. As the particle size of MoS2 becomes smaller, the adhesion and coverage of molybdenum disulfide on the surface of the friction material are significantly improved, and the anti-wear and anti-friction properties of molybdenum disulfide are also doubled. The energy band difference of the ultra-fine Nano molybdenum disulfide thin layer is close to 1.78eV, which matches the energy of light, and has application prospects in photovoltaic cell materials.

MoS2 Powder products have the advantages of good dispersibility and non-adhesion. MoS2 Powder can be added to various oils to form a colloidal state that never adheres. MoS2 Powder can increase the lubricity and extreme pressure of oils. MoS2 Powder is a good solid lubricant that can be lubricated in a vacuum or air environment for a long time. The friction coefficient is relatively low, and MoS2 Powder can be lubricated for a long time in the air below 350 ℃. With more than ten years of R&D experience, it can provide an annual output of 1,000 tons of MoS2 Powder as a patented technology product. MoS2 Powder is a lubricant grade of MoS2 available in three grades-Technical, Technical Fechnical Fine, and Super Fine.Typical MoS2 content (calculated average) is 98.5%.

As the main component of molybdenite, molybdenum disulfide is black solid powder with metallic luster. Molybdenum disulfide has stable properties. Molybdenum disulfide is insoluble in water, dilute acid and concentrated sulfuric acid. Generally, molybdenum disulfide is insoluble in other acids, alkalis and organic solvents, but molybdenum disulfide is soluble in aqua regia and boiled concentrated sulfuric acid. Molybdenum Disulfide is a lubricant grade of molybdenum disulfide (MoS2) available in three grades-Technical, Technical Fechnical Fine, and Super Fine.Typical MoS2 content (calculated average) is 98.5%. Molybdenum Disulfide is a good solid lubricant that can be lubricated in a vacuum or air environment for a long time. The friction coefficient is relatively low, and Molybdenum Disulfide can be lubricated for a long time in the air below 350℃. With more than ten years of R&D experience, it can provide an annual output of 1,000 tons of Molybdenum Disulfide as a patented technology product.

Molybdenum Disulfide For Release Agent is used as a powder system as a mold release agent, which has the advantages of high temperature resistance, wear resistance and tensile strength. In Molybdenum Disulfide For Release Agent a layer of molybdenum atoms is sandwiched between two layers of sulfur atoms. When Molybdenum Disulfide For Release Agent is dispersed between two metal surfaces, molybdenum disulfide binds to each metal surface through sulfur atoms, which hinders the contact of asperities (irregular parts of the metal surface), and sliding contact is in the sulfur atoms between the outer layers, the interaction between them is very weak. Therefore, the surfaces that bind Molybdenum Disulfide For Release Agent can easily slide against each other. The friction coefficient is relatively low, and Molybdenum Disulfide For Release Agent can be lubricated for a long time in the air below 350 ℃.