MoS2 Spray is a dry lubricant designed to provide long-lasting lubrication especially for lightly loaded or slowly moving to heavily loaded sliding surfaces. MoS2 Spray can form a solid molybdenum disulfide dry film on the surface of the parts, which can reduce friction and wear, and at the same time protect the parts from corrosion/seizing, contamination or wear.
MoS2 Spray is widely used in sliding parts, including plain bearings, gears, sliding systems, cams and valves, with an operating temperature range of up to 450°C.
MoS2 Spray
Introduction
MoS2 Spray/Molybdenum disulfide dry film lubricant spray/ An Air-curing dry film lubricant/A Dry-film lubricant protectants
MoS2 Spray is a dry lubricant designed to provide long-lasting lubrication especially for lightly loaded or slowly moving to heavily loaded sliding surfaces. MoS2 Spray can form a solid molybdenum disulfide dry film on the surface of the parts, which can reduce friction and wear, and at the same time protect the parts from corrosion/seizing, contamination or wear.
MoS2 Spray is widely used in sliding parts, including plain bearings, gears, sliding systems, cams and valves, with an operating temperature range of up to 450°C.
Applications:
l For sliding surfaces that are lightly loaded or slowly moving to heavy loads
l Used successfully for sliding parts with an operating temperature range of up to 450℃, including flat bearings, gears, sliding systems, cams and valves
Main performance:
l Prevent machine parts from corroding/seizing, abrasion and scratching
l Resistant to contamination by dust, dirt and other pollutants
l It can also be compatible with other lubricants after use
l Avoid tight corrosion / seizure of precision threaded parts
l Strong adhesion, excellent anti-rust effect
Typical data:
Specification Writers: These values are not intended for use in preparing specifications. Please contact your local dealer before writing specifications on this product.
Item | Description |
Appearance | dry powder |
Physical Properties | |
Solid lubricating materials | molybdenum disulfide |
Propellant | propane butane |
Chemical solvent | fatty hydrocarbon |
Drying time | 2 to 3 minutes (hand touch film) |
Completely dry (20℃) | 30min |
Temperature | |
Operating temperature | 0°C to 40°C (room temperature recommended) |
Working temperature range | -60℃ to 450℃ (forming thin film) |
Usable Life and Storage | |
Storage | store below 40℃, avoid direct sunlight |
usable Life | 24 months |
Packaging Details | 450ml/can |
Instructions | |
Shake the tank before use to mix the liquid in the tank evenly. For best results, please wipe clean the parts to be sprayed. Use a brush to evenly coat the surface of the part, and the coating thickness is recommended to be no more than 0.5mm. | |
Figure 1: Irregular workpieces sprayed with MoS2 Spray
Reduce the friction coefficient of parts, make the workpiece wear-resistant, and improve the service life of the product due to the use of MoS2 Spray.
Figure 2: Lubricating and anti-irritating coating for car sun visor snaps.
